Hoyamo PHR-1ST プロックウェル硬さ試験機 (25 x 25mm)
生産者: Hoyamo Model: PHR-1ST P/N: 812-313T 起源: China - 要件クオート
- 連絡先
전화번호: いい価格のため、連絡しなさい
ホットライン: (+84) 968060220
電話番号: +84 (24)62923267
Opening Size & Dimension Requirement: 25 x 25mm
Initial Test Force: 3 kgf
Total Test Force: 15 kgf, 30 kgf, 45 kgf
Test Head:
120°Diamond Indenter
1.588 mm carbide alloy ball
Testing Resolution: 0.5HR
Accuracy: Complying with ISO 6508, ASTM E18
Test Range: HRA, HRB, HRC…HRV etc, 15 scales.
Dimension: 330x260x150mm
Weight/ Weight/ Gross Weight: 0.8 kg/2.0 kg
Application Range: All metals including iron, steel copper, aluminium, zinc, lead, tin, carburized steel, nitrided steel etc.
Standard Delivery:
Instrument Main Body
120° Diamond Indenter
Bench Stand
V Anvil
Carrying Case
Extensions
Warranty Card / Qualified Certificate
Superficial Rockwell Hardness Block
1.588 mm Carbide Alloy Ball Indenter
Flat Anvil
Operation Manual
Packing List
Application:
Tests thin shaft >φ2 mm with V anvil.
Tests small ball >φ2.5 mm with ball testing anvil.
Tests small and irregular stampings with small supporting surface using slim raised spot anvil.
Tests tin plate and cold-rolled sheet using PHR-1S and diamond raised spot anvil.
Tests thin-wall slim pipes>φ4.8 mm using PHR-1ST
Features:
Test the superficial hardness of metals.
The test principle and accuracy comply to standard ISO6508.
With the bench stand it can be used on the desk as well as on site.
Tests the hardness of thin plates, slim tubes, thin shafts, small balls and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.
It is used for finished workpiece non-destructive hardness test directly. The small indentation is acceptable to most workpieces.
Traceable standard hardness block.
Indenter inspected with standard Rockwell hardness tester.
Test force calibrated with load cells directly traceable to national secondary benchmark.
- 良質な取り決め
- オリジナル保証
- 宅配便
- 買い取り簡単化