DILLON Quick-check Tension Meter (4500 Kg, Include certification for 9.52, 12.7 and 13.5 mm wire diameter)

-Tension capacities: 
10000 lb/45 kN/4500 kg
-Wire sizes: 3/16inch through 1 inch
-Accuracy: +3% instrument capacity (calibrated to specific wire size & type 
+5% with same wire diameter as calibrated but different wire type)
-Loading error: Cable elongation of only 0.08 inch (2mm)
-Display:Dot-graphic LCD display supports full text and 1 inch high digits. 
-Sheave range:Set accommodates rated wire size and 1/2” smaller. Multiple sheave 
sets may be used.
-Suggested wire calibrations:  Calibrate each wire diameter needed with the 
most appropriate sheaves. If two wire types are used of the same diameter (e.g. 
½” 1x7 and ½” 6x19), calibrate each type independently if accuracy is critical. 
-Environment protection: Suitable for continued outdoor use.
Operating range: -4°F to 140°F (-20°C to 60°C)
-Tension units of measure: pound-force, kilogram force, Newtons
-Resolution: configurable low/med/high 
-Recalibration:At user discretion. Commonly 24 months but should be more frequently with heavy use. Factory 
recalibrations conducted typically in 2-4 days. On-site recalibration may be 
possible through your Dillon distributor.
-Size: 10 x 23 x 3 inch (25 x 59 x 8 cm)
-Weight:Approx 11 lb (5 kg)

Include: meter,  First wire calibration, Manual, first set of sheaves S