Frequency Range: 10MHz
Waveform types：Sine, Square, Triangle, Ramp, Pulse, Sawtooth,TTL Leveled Square, DC
Output :20Vp-p
Frequency Counter: 200mHz to 110MHz
Display: 7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz,
Power: 115 or /230 VAC ± 10%, 48 to 66Hz
Dimensions and weight：240(W) X 270(D) X 90(H)mm;3kg
Standard Accessories: Power Cord, BNC Cable, Fuse, Instruction Manual
Details
| - |
4-in-1 Sweep, Function & Pulse Generator and Frequency Counter |
| - |
Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs |
| - |
0.1 Hz to 10 MHz Frequency Out put in 7 Ranges |
| - |
Built in 7digits External Counter Display measuring up to 110MHz |
| - |
Internal and External linear Sweep control from 1:1 to 100:1 |
| - |
Variable Symmetry for generating Sawtooth and Pulse waveforms |
| - |
TTL leveled Square waveform output |
| - |
Variable DC Offset control |
| - |
Variable Output level control with 20 dB Attenuator and Amplitude control |
|
|
Waveforms |
Sine, Square, Triangle, Ramp, Pulse, Sawtooth, |
| TTL Leveled Square, DC |
| |
|
| Frequency Range |
0.1Hz to 10MHz in 7 Range (1,10,100,1K,10K,100K,1M) |
| |
|
| Frequency Accuracy |
± 5% of full scale |
| |
|
| Output Level |
20Vp-p in open circuit, 10Vp-p into 50Ω Load |
| |
|
| DC Offset Control |
More than +/-5V (into 50ohm) |
| |
|
| Output Impedance |
50Ω±5% |
| |
|
| Attenuator |
-20dB fixed and continuously variable |
| |
|
|
|
|
Sine wave |
Flatness : ±0.3dB to 10MHz |
| Distortion : Less than 1% at 0.1Hz to 100KHz |
| |
|
| Square wave |
Rise and Fall time : Less than 25nSec |
| |
|
| Triangle wave |
Linearity : More than 99% at 0.1Hz to 100 kHz |
| |
|
| TTL Output |
Rise and Fall time : Less than 25nSec |
| Output Level :TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V) |
| |
|
| Symmetry Variation |
1 :1 to 10 : 1 |
| |
|
|
| Sweep Function |
| Characteristic |
|
Mode |
Linear |
| |
|
| Width |
Variable from 1 :1 to 100 : 1 |
| |
|
| Rate |
0.5Hz to 50Hz(20mSec to 2Sec) |
| |
|
| External VCF Input |
Input Voltage 0 to 10V |
| Input Impedance : Approx. 10 kohm |
| |
|
|
| Frequency Counter |
| Characteristic |
|
Display |
7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz, |
| |
|
| Frequency Range |
200mHz to 110MHz with Auto Range |
| |
|
| Accuracy |
+/- Timebase Error+/- 1Count |
| |
|
| Low pass Filter |
-3dB, 100kHz |
| |
|
| Input Sensitivity |
100mVrms |
| |
|
| Time base |
10MHz Crystal, 20ppm |
| |
|
| Max. Input Voltage |
250Vpp |
| |
|
|
| General |
Power Requirement |
115 or /230 VAC ± 10%, 48 to 66Hz |
| |
| |
|
| Operating Temperature |
0 to 50℃ (Accuracy specified at 25 ± 5℃) |
| |
|
| Dimension |
240(W) X 270(D) X 90(H)mm |
| |
|
| Weight |
Approx. 3 kg |
| |
|
| Standard Accessories |
Power Cord, BNC Cable, Fuse, Instruction Manual |
| |
|
|
