Specifications
Type: MPS Series Switch-mode Microwave Power Supply System
Power Requirements: 3 x 400 V 50/60 Hz or 3 x 480 V 50/60 Hz
Alarm Management:
Magnetron Overtemperature
Low Air Pressure from Head
Low Water Flow in Magnetron Head
Open Interlock
Supply of electromagnet incorrect
Filament resistance out of range
Alarm coming from SMxxxx inverter
Min and Max Ref/Fwd. Power
Weight:
MPS72: 181 kg
Cooling:
MPS 72 air intake: approx 2200 m3/h, water: 6L/min
Ambient Operating Temperature: 5°C to 40°C (41-104°F)
Controller Filament Output Stability: within 1% for input fluctuations
Controller Dimensions: 19 inch Standard Rack, 3U Rack depth: 440 mm without handles
Communication: MBUS interface with Profibus or Modbus/TCP port
Controller Weight: 16 kg
Transient Overvoltage: overvoltage cat. II according IEC 664
Power Unit Intake Current:
@ 400 V: 40 A rms
@ 480 V: 34 A rms
Power Unit Dimensions: 19 inch Standard Rack, 7U Rack depth: 440 mm without handles
Water flow rate for the Power Unit: 2L/min (water not condensing 12°C - 35°C)
Use: Indoor use only
Relative Humidity: 80% for temperature up to 31°C (88°F) decreasing linearly to 50% RH at 40°C (104°F)
Housing Cabinet Depth: 800 mm (minimum)
Power Unit Weight: 55 kg
Altitude: Tested up to 2,000 m (~6,000 ft)
Power Unit Voltage Limit: ±10% minimum
For specific range please check the attachment below!
- 质量承诺
- 正品保修
- 送货到家
- 交易简单化