Elcometer A415CFTI 工业油漆和粉末测厚仪(0~1000μm,USB,蓝牙)

Kiểu đầu dò tích hợp: Ferrous
Đầu ra dữ liệu trực tiếp: USB và bluetooth
Tốc độ đọc: 60 kết quả mỗi phút
Độ chính xác: ± 1-3% hoặc ± 2.5μm
Dải đo: 0~1000μm
Nhiệt độ hoạt động: -10 đến 50 ° C
Độ ẩm tương đối (RH): 0-95%
Nguồn cung cấp: 2 Pin x AA hoặc qua cổng USB
Kích thướcmáy đo: 14.1 x 7.30 x 3.70cm
Máy đo Trọng lượng: 156g / 5.5oz (bao gồm pin)
Đóng gói: Máy chính, 2 pin AA, lá thép và nhôm kiểm tra, dây đeo tay, túi đeo chống va đập, bảo vệ màn hình, chứng nhận hiệu chuẩn của nhà sản xuất, hướng dẫn sử dụng, cáp USB, CD phần mềm Elcomaster





Elcometer 415 Industrial Paint & Powder Thickness Gauge

The new Elcometer 415 Industrial Paint & Powder Thickness Gauge provides simple, fast and accurate coating thickness measurements on smooth and thin industrial paint and powder coatings. 

The new Elcometer 415 automatically switches between ferrous and non-ferrous metals. Designed to measure cured paint and powder coatings up to 1000μm (40mils), the thickness gauge is ideal for the industrial paint & powder market.

With a reading rate of 60+ readings per minute, the new paint and powder thickness gauge allows to inspect more industrial materials in less time.

Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual paint and powder thickness readings can be transferred via USB or Bluetooth®  to PC or a mobile device for analysis and instant report generation.

Paint & Powder Thickness Reports


Key features and benefits of the Elcometer 415 Paint & Powder Thickness Gauge include:


  • Incredibly fast (60+ readings per minute), reduces inspection times, increasing productivity
  • Automatically switches between ferrous and non-ferrous substrates1
  • Measures cured paint & powder coatings up to 1000μm (40mils)
  • 1 point and 2 point calibration ensures accuracy on smooth and thin coated substrates
  • Easy to use, ergonomic design provides maximum comfort for continuous use
  • Large easy to read values in microns or mils
  • Auto rotating large colour display provides clear visibility whatever the angle of measurement
  • Scratch, solvent and powder resistant display
  • Rugged and resistant to powder coatings ingress equivalent to IP64
  • Transfer live data via USB or Bluetooth® to ElcoMaster® for instant report generation




Elcometer 415 Industrial Paint & Powder Thickness Gauge

Technical Specification


Model B

Model B

Model T

Model T

Part Number





Calibration Test Certificate

Built in probe type

Ferrous (F)

Ferrous / Non-Ferrous (FNF)

Ferrous (F)

Ferrous / Non-Ferrous (FNF)

On screen statistics


Number of readings, n;

Average (mean), x;

Lowest reading, Lo

Highest reading, Hi

Live data output



Bluetooth® & USB

Bluetooth® & USB

Reading rate

60+ readings per minute


±1-3% or ±2.5μm (±0.1mil)

Measurement Range

0-1000μm / 0-40mils

Operating Temperature

-10 to 50°C / 14 to 122°F

Relative Humidity (RH)

0 to 95% (RH)

Power Supply

2 x AA Batteries or via USB (rechargeable batteries can also be used)

Gauge Dimensions

14.1 x 7.30 x 3.70cm / 5.55 x 2.87 x 1.46” (h x w x d)

Gauge Weight

156g / 5.5oz (including batteries)

Packing List

Elcometer 415 gauge, 2 x AA batteries, steel & aluminium check pieces*, foil set, wrist strap, impact resistant carry case,

screen protector†, calibration test certificate, operating instructions, USB cable†, ElcoMaster CD† & 2 year warranty extension card


1 When subject to a 2-point calibration: ±1% when calibrated close to the required thickness, ±3% across the range.

† Model T
* F models: steel check piece; FNF models: steel & aluminium check pieces




  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化